215kwh LiFePO4 Backup Power on/off Grid Solar Power System Distributed Energy System Ess Solutions Storage

• Customization: Available
• Type: Li-ion Battery
• Cathode Material: LFP
• Model NO.: SHIYOU-215KWESS
• Battery Rated Voltage: 768VDC
• Battery Voltage Range: 600~876VDC
• Charge-Discharge Rate: 0.5p
• Number of Charge and Discharge: 6000
• Battery Cooling Mode: Air Conditioning Intelligent Air Cooling
• Maximum Power: 110kw(10min)120kw(1min)
• Transport Package: Wooden
• Specification: 1450*1050*2200mm
• Trademark: Shiyou
• Origin: China
• Production Capacity: 5000/Year

Product Description

 

Product Description

Energy storage All in One is a cutting-edge lithium battery solution designed for industrial and commercial applications, data centers, park energy storage, and more. This optical storage integrated cabinet system product specification (neutral version) offers a comprehensive solution for energy storage needs.

The system integrates EMS, energy storage converter, MPPT, energy storage battery, cooling air conditioning, fire protection system, and system distribution in an outdoor integrated cabinet design. This seamless integration of subsystems such as power electronics and battery management ensures optimal performance and efficiency.

Energy storage All in One is a reliable and efficient solution for various scenarios, providing a complete energy storage solution for businesses looking to optimize their energy usage and reduce costs.
 

Product Parameters

 

Product model	SH-215P100K-PV
Battery parameters
Cell type	Lithium iron phosphate 3.2V/280Ah
Battery Pack Configuration	14.336kWh/1P16S
Battery system configuration	1P22440S
Battery system capacity	215kWh
Battery rated voltage	768VDC
Battery voltage range	600~876VDC
Charge-discharge rate	0.5P
Number of charge and discharge	6000
Battery cooling mode	Air conditioning intelligent air cooling

 

 

AC parameter
Rated power	100kW
Maximum power	110kW(10min) 120kW(1min)
Current total harmonic distortion rate	≤3%
Direct current component	< 0.5% output rated current
Rated voltage	3*230V/400V
Allowable grid voltage range	360V~440V
Access method	3P4W+PE
Rated grid frequency	50/60Hz
Power factor range	1 (lead)~ -1 (lag)
Off-grid operation	Support, but only 50% load capacity
Efficiency
PCS maximum efficiency	98.8%
System maximum efficiency	90%
DC/DC Module
PV side
Rated power	120kW (PV input 8 * 15kW)
Rated current	360A (PV input 8 * 45A)
Rated voltage	350V
Maximum voltage	1000V
Voltage range	150~1000V

 

 

Full power voltage range	340~1000V
Low side voltage requirements in buck mode	150V ≤ low voltage terminal voltage ≤ high voltage terminal voltage, maximum 1000V
Low side starting voltage	150V
Voltage stability	1%
Current stability	1%
DC high voltage side
Rated power	120kW
Rated current	180A
Rated voltage	700V
Maximum voltage	1000V
Voltage range	350~1000V
Full power voltage range	680~850V
Low voltage side voltage requirement for buck mode 1000V ≥ high voltage terminal voltage * 0.95 > low voltage terminal voltage, minimum 350V
High voltage side starting voltage: 350V
Voltage stability: 1%
Current stability 1%
Protection
DC input reverse protection	Support
AC input reverse Self-Adaptation	Support
Insulation impedance detection	Support

 

 

AC overcurrent protection	Support
AC overvoltage protection	Support
AC short circuit protection	Support
Grid-side surge protection	Support
Power grid abnormal automatic switching	Support
Low pressure crossing	Support
High voltage crossing	Support
Communication and human-machine interaction
Communication interface	RS232/RS485/WiFi/4G/Ethernet
Human-machine interaction	Touch screen/indicator light
System parameters
Weight	2.3t
Dimensions (width * depth * height)	1450*1050*2200mm
Protection level	IP55
Noise	<75dB
Working temperature	-20 ºC~ + 55 ºC (reduction above 40 ºC)
Storage temperature	-20ºC~+55ºC
Relative humidity	5%~ 95% non-condensing
Fire protection programme	Perfluorohexanone/aerosol (optional)
Working altitude	≤ 4000m (reduction required for exceeding 2000m)

Cooling mode

Air conditioning intelligent air cooling

Marking, packaging, transportation, storage

Mark
This product has a nameplate, which includes information such as product name, model, rated power, nominal voltage, rated capacity, and product number.
This product has our company logo on the front.
This product has danger warning signs in obvious places.

Transport
Forklift transport
If the installation location and transportation road are stable, forklift transportation can be used. When using forklift transportation, the following requirements must be met:
Before transportation, please ensure that the cabinet doors are tightly locked.
Choose to transport in good weather conditions, remove any obstacles that may exist or may exist on the transportation road, and ensure that the road is unobstructed.
Prepare for personnel evacuation in advance and prohibit unrelated personnel from entering the transportation road.
At least 2 people are required for transportation. The forklift must have the corresponding load-bearing capacity, and the length of the fork legs must meet the equipment requirements. Test adjustment should be conducted before transportation to ensure the safety and reliability of the tools. The plug should be inserted into the    socket at the bottom of the cabinet, and transportation should not be carried out outside the plug.
During transportation, ensure that the energy storage integrated cabinet is kept in a balanced state, transported at a uniform speed, with as low a fluctuation height aspossible, and no significant shaking is allowed. Try to ensure a smooth transportation process for the equipment.
Take off and land with care to avoid impact or vibration.
When moving, pay attention to the ground being flat and free of debris, and avoid contact with sharp objects on the ground.
Lifting transport When using lifting transportation, the following requirements must be met:
Before transportation, please ensure that the cabinet doors are locked and choose to transport in good weather conditions.
Prepare for personnel evacuation in advance, and prohibit standing within 5m-10m of the lifting area and equipment to ensure on-site safety.
During transportation, there are professional personnel to direct the entire process. The strength of the sling used must meet the weight of the equipment.
Use all necessary auxiliary means to ensure the smooth transportation process of the equipment as much as possible.
Before transportation, test hoisting should be carried out. After the test adjustment is 300mm away from the support surface, the inspection should be suspended to
ensure that the sling and the connection between the sling are firm and reliable before lifting.
When lifting, ensure vertical lifting, avoid dragging, and do not push the equipment.
When lifting, the equipment should be transported at a uniform speed, with the lowest possible height and no significant shaking.
Handle with care during takeoff and landing to avoid impact or vibration. Note that during the lifting process, the cabinet should not pass over people, let alone stay.
The site where the equipment is placed should be solid, flat, well-drained, and free of obstacles or protrusions.

Storage
The equipment must be placed in a ventilated, clean, and dry space, with a
temperature between -40 ºC~ + 60 ºC and an ambient temperature change of <
1 ºC/min. When stored for a long time, it must be covered or corresponding measures
taken to ensure that the module is not affected by pollution and the environment. After the user purchases the module, the following points must be noted for
temporary and long-term storage:

When storing, try to pack it into our company's packaging box according to the original packaging.
Do not allow the equipment to be placed in humid, high temperature, or outdoor exposure for a long time.
Long-term storage can lead to the deterioration of electrolytic capacitors. It is
necessary to ensure that they are powered on once a year for at least 5 hours. The input voltage must be slowly increased to the rated value using a voltage regulator.

Daily maintenance
During each on-site maintenance, a functional check should be conducted on the SH-215P100K-PV series energy storage All in One, mainly including:
1. Check the connection cable;
2. Check the working condition of the energy storage All in One;
3. Check the operation mode switch of energy storage All in One;
4. Check the status of the All in One indicator light of the energy storage;
5. Check the status of the dustproof net. If the dust accumulation is serious, the dustproof net needs to be replaced.
6. Check the condensation state of the energy storage All in One, and ventilate if there is condensation;

Product warning label
The warning signs on and inside the SH-215P100K-PV series energy storage All in One cabinet contain important information for safe operation of SH-215P100K-PV   series energy storage products.