Customization: | Available |
---|---|
Application: | Three Phase Transducer, High Frequency Converter Transducer |
Output Type: | Single |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The frequency converter can be automatically adjusted according to the load characteristics.. Wide range of functions, applicable to most applications
Technical Specification
Items | NZ100 | |
Power Supply |
Rated voltage,Frequency | One-phase/Three-phase AC 220V/380V 50/60Hz |
Voltage Range | 220V:170~240V380V:330V~440V | |
Output | Voltage Range | 220V:0~220V 380V:0~380V |
Frequency Range | 0.10~400.00Hz | |
Control method | V/F control | |
Indication | Operating status/Alarm definition/interactive guidance:frequency setting,the output frequency/current,DC bus voltage and so on. |
|
Control Speculations |
Output Frequency Range | 0.10Hz~400.00Hz |
Frequency Setting Resolution | Digital input:0.10Hz,analoginput:0.1%of maximum output frequency | |
Output Frequency Accuracy | 0.01Hz | |
V/F Control | Setting V/F curve to satisfy various load requirements. | |
Torque Boost | Auto increase:auto raise torque by loading Condtion;Manual increase:enable to set 0.0~20.0%of raising torque. | |
Multifunctional Input Terminal |
Four multi-function input terminals,realizing functions including eight section speed control,Program running,four-section acceleration/deceleration speed switch,UP/DOWN function and emergency stop and other functions |
|
Multifunctional Output Terminal |
1 multi-function output terminals for displaying of run,zero speed,external abnormity,program operation and other information and warnings |
|
Acceleration/ Deceleration Time Setting |
0~999.9s acceleration/deceleration time can be set individually. | |
Other functions |
PID Control | Built-in PID control |
RS485 | Standard RS485 communication function(MODBUS) | |
Frequency Setting |
Analog input:O~10V,4~20mA Digital input:Operation panel or RS485 or UP/DOWN. Note:AVi terminals can be used to select an Analog voltage input (AV)and analog current input (Al)through the switch J2. |
|
Multi-speed | Four multifunction input terminals,15 section speed can be set | |
Automatic voltage regulation |
Automatic voltage regulation function can be selected | |
Counter | Built-in 2 group of counters | |
Protection/ Warning Function |
Overload | 150%,60 second(Constant torque) |
Over Voltage | Over voltage prote ction can beset. | |
Protection/ Warning Function |
UnderVoltage | Under voltage protection can be set |
Other Protections | Output short circuit,over current,and parameter lock and so on. | |
Environment | Ambient Temperature | -10ºC to 40ºC(non-freezing) |
AmbientHumidity | Max.95%(non-condensing) | |
Altitude | Lower than 1000m | |
Vibration | Max.0.5G | |
Structure | Cooling Mode | Forced air cooling |
Protective Structure | IP 20 | |
Installation | Wall-mounted or standard 35mm rail mounting (≤5.5kW) |
Model | Input Current(A) |
Output Power (kW) |
Capacity (KVA) |
Output Current(A) |
Overload capacity (60s)(A) |
Motor Equipped(kW) |
Input Voltage(V):1PH AC220V±15% | ||||||
NZ100-0R4G-2 | 5.4 | 0.4 | 1.0 | 2.5 | 3.75 | 0.4 |
NZ100-0R75G-2 | 8.2 | 0.75 | 2.0 | 5 | 7.5 | 0.75 |
NZ100-1R5G-2 | 14 | 1.5 | 2.8 | 7 | 10.5 | 1.5 |
NZ100-2R2G-2 | 23 | 2.2 | 4.5 | 11 | 16.5 | 2.2 |
Input Voltage(V):3PH AC380V±15% | ||||||
NZ100-0R4G-4 | 3.4 | 0.4 | 2 | 2 | 3 | 0.4 |
NZ100-0R75G-4 | 3.8 | 0.75 | 2.2 | 2.7 | 4.05 | 0.75 |
NZ100-1R5G-4 | 5.0 | 1.5 | 3.2 | 4.0 | 6 | 1.5 |
NZ100-2R2G-4 | 5.8 | 2.2 | 4.0 | 5.0 | 7.5 | 2.2 |
NZ100-3R7G/5R5P-4 | 10.7 | 3.7 | 6.8 | 8.6 | 12.9 | 3.7 |
NZ100-5R5G/7R5P-4 | 14.6 | 5.5 | 10 | 12.5 | 18.75 | 5.5 |
NZ100-7R5G/11P-4 | 20 | 7.5 | 11.2 | 17.5 | 26.25 | 7.5 |
NZ100-11G/15P-4 | 26 | 11 | 17 | 24 | 36 | 11 |
NZ100-15G/18P-4 | 35 | 15 | 26 | 33 | 49.5 | 15 |
NZ100-18G/22P-4 | 38 | 18.5 | 32 | 40 | 60 | 18.5 |
NZ100-22G/30P-4 | 46 | 22 | 37 | 47 | 70.5 | 22 |
NZ100-30G/37P-4 | 62 | 30 | 52 | 65 | 97.5 | 30 |
NZ100-37G/45P-4 | 76 | 37 | 64 | 80 | 120 | 37 |
NZ100-45G/55P-4 | 90 | 45 | 72 | 90 | 135 | 45 |
NZ100-55G/75P-4 | 105 | 55 | 84 | 110 | 165 | 55 |
NZ100-75G/90P-4 | 140 | 75 | 115 | 152 | 228 | 75 |
NZ100-90G/110P-4 | 160 | 90 | 135 | 176 | 264 | 90 |
NZ100-110G/132P-4 | 210 | 110 | 160 | 210 | 315 | 110 |
NZ100-132G/160P-4 | 240 | 132 | 193 | 255 | 382.5 | 132 |
NZ100-160G/185P-4 | 290 | 160 | 230 | 305 | 457.5 | 160 |
NZ100-185G/200P-4 | 355 | 185 | 260 | 340 | 510 | 185 |
NZ100-200G/220P-4 | 385 | 200 | 290 | 380 | 570 | 200 |
NZ100-220G/250P-4 | 430 | 220 | 320 | 425 | 637.5 | 220 |
NZ100-250G/280P-4 | 468 | 250 | 365 | 480 | 720 | 250 |
NZ100-280G/315P-4 | 525 | 280 | 427 | 530 | 795 | 280 |
NZ100-315G/350P-4 | 610 | 315 | 460 | 600 | 900 | 315 |
Model | W | H | D | A | B | φd |
NZ100-0R4G-2 | 68 | 132 | 102 | 120 | 57 | 4.5 |
NZ100-0R75G-2 | ||||||
NZ100-1R5G-2 | ||||||
NZ100-2R2G-2 | 72 | 142 | 112.2 | 130 | 61 | 4.5 |
NZ100-0R4G-4 | ||||||
NZ100-0R75G-4 | ||||||
NZ100-1R5G-4 | ||||||
NZ100-2R2G-4 | ||||||
NZ100-3R7G/5R5P-4 | 85 | 180 | 116 | 167 | 72 | 5.5 |
NZ100-5R5G/7R5P-4 | ||||||
NZ100-7R5G/11P-4 | 106 | 240 | 153 | 230 | 96 | 4.5 |
NZ100-11G/15P-4 | ||||||
NZ100-15G/18P-4 | 151 | 332 | 165.5 | 318 | 137 | 7 |
NZ100-18G/22P-4 | ||||||
NZ100-22O/30P-4 | ||||||
NZ100-30G/37P-4 | 217 | 400 | 201 | 385 | 202 | 7 |
NZ100-37G/45P-4 | ||||||
NZ100-45G/55P-4 | 300 | 470 | 240 | 455 | 200 | 9 |
NZ100-55G/75P-4 | ||||||
NZ100-75G/90P-4 | 275 | 630 | 310 | 612 | 200 | 9 |
NZ100-90G/110P-4 | ||||||
NZ100-110G/132P-4 | ||||||
NZ100-132G/160P-4 | 400 | 715 | 310 | 695 | 320 | 11 |
NZ100-160G/185P-4 | ||||||
NZ100-185G/200P-4 | 400 | 830 | 320 | 810 | 160+160 | 11 |
NZ100-200G/220P-4 | ||||||
NZ100-220G/250P-4 | ||||||
NZ100-250G/280P-4 | 530 | 970 | 350 | 950 | 215+215 | 11 |
NZ100-280G8315P-4 | ||||||
NZ100-315G/350P-4 |